Wenzhou Baoerte Autopart CO.,LTD

Wenzhou Baoerte Autopart CO.,LTD

info@baoerte.cn

86-0577-65292079

Wenzhou Baoerte Autopart CO.,LTD
Home> Blog> Gas spring support rod installation steps

Gas spring support rod installation steps

March 19, 2022
Nine installation steps of the Gas Spring support rod The gas spring piston rod must be installed in a downward position and must not be flipped. This will reduce friction and ensure the best damping quality and cushioning performance.
2. The gas spring is a high-pressure product and it is forbidden to analyze, fire, and bump it.
3, gas springs should not be subject to tilt or lateral force in the work. Can not be used for handrails.
4. It is determined that the fulcrum installation position is a guarantee that the gas spring can work correctly. The gas spring must be installed in the correct way. That is, when it is closed, let it move through the centerline of the structure. Otherwise, the gas spring will often push the door open automatically.
5. To ensure the reliability of the seal, do not damage the surface of the piston rod. It is forbidden to apply paint and chemical substances on the piston rod. It is also not allowed to spray or paint after the gas spring is installed at the desired position.
6, the use of ambient temperature: -35 °C - +70 °C. (Specific manufacturing 80°C)
7, gas spring piston rod is strictly prohibited to rotate to the left. If you need to adjust the joint direction, you can only turn to the right.
8. Install the connection point, it should be flexible and can not be stuck.
9, choose a reasonable size, the size of the force to be appropriate, the piston rod stroke size to leave 8 mm margin.
Contact Us

Author:

Ms. Feifei Dai

E-mail:

info@baoerte.cn

Phone/WhatsApp:

+8615757871842

Popular Products
You may also like
Related Information
Belt conveyor belt deviation treatment

Belt deviation is the most common failure when the belt conveyor is running. In order to solve such failures, it is important to pay attention to the dimensional accuracy of the installation and...

Introduction to gas spring

Gas spring is an industrial accessory that can support, cushion, brake, height adjust and adjust angle. It consists of the following parts: pressure cylinders, piston rods, pistons, seal guide...

Gas spring characteristics

The gas spring is a kind of liftable spring that can save labor. It can be divided into self-locking gas springs (such as the bottom lift of the seat, the backrest of the boss chair, etc.), and the...

Research on gas spring funnel type auxiliary device

The new air spring structure adopting the hourglass-type auxiliary spring has the same structure, and the air spring is composed of a combination of a screw seal and a pressure self-sealing. The...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Contact Us

Author:

Ms. Feifei Dai

E-mail:

info@baoerte.cn

Phone/WhatsApp:

+8615757871842

Popular Products
Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send